Burning Lead, 100', 1/0 Cable,3/8

Burning Lead, 100', 1/0 Cable,3/8"Hose,Ends,BR-22

Burning Lead, 300', 1/0 Cable,3/8

Burning Lead, 300', 1/0 Cable,3/8"Hose,Ends,BR-22

Burning Lead, 200', 1/0 Cable,3/8"Hose,Ends,BR-22

$0.00
Availability: In stock
SKU
BL-2
UNDERWATER 1/0 BURNING LEAD, 200' (BL-2)

Divers Supply's BL-2 burning lead is constructed of 1/0 weld cable and Gates 33HB.375 taped with 2” wide high grade black duct tape, approx. 8 to 10 inches apart, the full length of the assembly. The working end is equipped with a Broco BR-22 underwater cutting torch. The surface end is terminated with a cable lug on the cable and a reusable, brass oxygen (O2) fitting on the hose.

While this is our standard configurations, we can make custom burning leads of different lengths, cable gauge and torch to meet your needs - just give us a call!

BL-2 Specifications:
Length: 200' (61m)
1/0 Welding Cable: ASTM B172 rope stranded copper conductor insulated with elastomer rubber hybrid compound.
Gas Hose: Gates 3/8” I.D. (33HB.375) Dive Master diver's breathing gas hose.
Torch: Broco BR-22 underwater cutting torch.
Weight: 125 lb (57 kg)


Welding Cable Specifications: Gauge: 1/0 Conductor: ASTM B172 Rope stranded copper Voltage Rating: 600V (intermittent use, up to 3 hours continuous) Separator: Vinyl Insulator: Oil and water resistant elastomer rubber hybrid compound Safety Liner: Visible under the outer jacket, so you can see any cuts, nicks or excessive wear Temperature Range: -49°F to 105°F (-45°C to 40°C) Stranding #: 1064 Stranding Construction: 19 x 56 / 30 Conductor I.D.: 0.397" (10mm) Finished I.D.: 0.61" (15.5mm)
Gas Hose Specifications:
Description Gates 3/8” I.D. (33HB.375) Dive Master diver's breathing gas hose.
Inner Diameter 3/8" (9.5 mm)
Outer Diameter: 0.75" (19.1 mm)
Maximum Working Pressure: 1125 psi (77.6 bar)
Minimum Bend Radius: 4.0" (102 mm)
Temperature Range: -20°F to 120°F (-29°C to 49°C)
Tube: Type C (Nitrile), Black
Reinforcement: Braided, high tensile synthetic textile cord
Cover: Type A (chloroprene), black, perforated
Design Factor: 4:1
Weight: 0.19 lb/foot (283 g/m)
Standards: Meets BS EN250:2014
Cleanliness: At the factory, the length of hose is rinsed with water for 30 seconds to 1 minute, followed by a sponge plug blown through the hose to remove water. As second, alcohol soaked sponge is then blown through the hose. followed by air for 30 seconds.
Write Your Own Review
You're reviewing:Burning Lead, 200', 1/0 Cable,3/8"Hose,Ends,BR-22