Drill, Hammer,2

Drill, Hammer,2"Dia.Max,736 Skil Hex,Hoses,Stanley

Drill, U/W, 1/2" Chuck, 12GPM,2000PSI,Hydrau,Whips

was $2,837.00 Special Price $2,553.30
Availability: In stock
SKU
DL07652
STANLEY DL07 UNDERWATER DRILL (DL07652)

The Stanley DL07 hydraulic drill is a forward/reverse, variable speed drill with a 1/2" keyed chuck for underwater drilling applications. The DL07 has more than enough torque to drill most steel, masonry, wood or coral. A two position assist handle and trigger guard are standard. See chart below for speeds at select gpm of hydraulic flow. Painted hi-visibility yellow.

DL07652 Specifications
Chuck Capacity: 1/2" (12mm)
Flow Range: 3-10 gpm (11.3-38 lpm)
Working Pressure: 1000-2000 psi (70-140 bar)
Full Relief Setting: 2250 psi (155 bar)
Weight: 7.8 lb (3.5 kg)
Length: 10.5" (26.7m)
Hydraulic Ports: -8 SAE o-ring
Couplers: No (see Accessories)
Hose Whips: Yes (3/8" NPT male)


DL07652 Features
Integral Stanley Hyrevz gear motor produces high torque
Stainless Steel spools and fasteners
Forward-Reverse with variable speed
Dual position assist handle provides increased control
Oversized trigger with guard for operator comfort
Wiper seals on reversing and trigger spool
Built in reverse check valve ensures long seal life
Plastisol handle for comfortable ergonomic grip
Forward position of handle provides better balance
Open Center/Closed Center-Dual Spool Feature
Cast-in lifting eye


DL07652 Speed/Hydraulic Flow
350 rpm at 3 gpm (11.3 lpm)
475 rpm @ 4 gpm (15 lpm)
750 rpm @ 6 gpm (23 lpm)
1000 rpm @ 8 gpm (30 lpm)
1250 rpm @ 10 gpm (38 lpm)


DL07652 Torque at PSI/Bar
4 ft-lbs @ 500 psi (5 Nm @ 35 bar)
9 ft-lbs @ 1000 psi (12 Nm @ 70 bar)
14 ft-lbs @ 1500 psi (19 Nm @ 105 bar)
19 ft-lbs @ 2000 psi (26 Nm @ 140 bar)


DL07652 Accessories
03971: Flush-Face Coupling Set, 3/8" NPT
03974: Flush-Face Coupling Set, 1/2" NPT
31848: Dual Hose, 50' x 1/2", with couplers
31972: Dual Hose, 25' x 1/2", with couplers
58633: Twinned Hose, 25' x 1/2", with couplers
58634: Twinned Hose, 50' x 1/2", with couplers
01857: Adjustable Chuck and Adapter, 3/4" square x 3/4"
04365: 3/4" Chuck, 3 JT taper , use 7/16" bits
More Information
Vendor Stanley
Write Your Own Review
You're reviewing:Drill, U/W, 1/2" Chuck, 12GPM,2000PSI,Hydrau,Whips