Helmet, KM-47, Yellow, Stock Trim,W.P. Connect.

Helmet, KM-47, Yellow, Stock Trim,W.P. Connect.

Helmet, KM-47, Yellow, Stock Trim, Com. Posts

$0.00
Availability: Out of stock
SKU
500-070
YELLOW KIRBY MORGAN 47 WITH BARE WIRE COMMS POSTS

The KM-47 consists of two major assemblies: like other "metal bottom" helmets, the helmet shell/helmet ring assembly and the neck dam/neck ring assembly. The chrome plated, machined brass helmet ring houses the latch catches and provides protection for the bottom end of the helmet. An internal, adjustable chin strap, along with the adjustable neck pad on the locking collar, gives the diver a secure, custom fit.

Features
  • Air Train: The air train diffuses incoming breathing air/gas onto the face port/lens to defog and ventilate.
  • Defogging Steady Flow Valve: Provides an additional flow of gas into the helmet for ventilation and defogging.
  • Emergency (EGS) Valve: Supplies backup breathing gas to the diver.
  • Fiberglass and Carbon Fiber Reinforced Shell: Kirby Morgan has over 50 years experience in composite laminations. The helmet shell is hand laid up glass fiber reinforced thermal setting polyester (fiberglass) with carbon fiber reinforcement at key points for added durability. It is light and highly impact resistant, and provides a heat/cold barrier as well as being an excellent electrical nonconductor.
  • Gas Supply Non-Return Valve: Commercial Rated, It prevents loss of gas pressure in the event of umbilical damage.
  • Nose Block Device: Nose Block Device allows the diver to block the nose to equalize ears.
  • Rapid Change Modular Communications Systems: Because the module is easily removed the helmet, repair or replacement of communications parts is quick and trouble free. It is available with either a male waterproof connector or a bare wire post connection.
  • REX Regulator: Full adjustment balanced piston is a breakthrough design that exceeds all requirements of all government or other testing agencies. It has the best work-of-breathing performance when compared to ANY other commercial diving regulator.
  • Side & Top Weights: Brings unsurpassed balance to the helmet while providing for accessory mounting areas.
  • Side Block: Multi use side block has additional ports built in to provide controlled air flow, if needed.
  • Silicone Oral Nasal Mask: Made of a superior silicone material which is hypo-allergenic and has a longer work life than latex.
  • Whisker Wings: Bubble deflecting Whisker wings keep bubbles further from face port and ears, improving visibility and decreasing internal noise.
  • Positive-Lock Latch System: Developed by Kirby Morgan in 1992, consists of two sealed Positive-Lock pull pins: which are pulled forward to release the neck collar and neck dam locking system. Even when the latches are released, the O-ring sealed neck dam maintains a positive seal and will not allow the seal to be broken until the collar actually clears the diver's shoulders, thus helping to prevent any flooding of the helmet.
  • Head Cushion: Gives the commercial diving helmet a secure, well balanced feel as well as excellent thermal protection during long work periods.
  • Adjustable Neck Pad: The helmet attached yoke system has an adjustable neck pad which is made from a scuff resistant elastomer. In conjunction with the spring activated front neck dam ring lock, it provides protection for the bottom of the commercial diving helmet.
  • Internal Adjustable Chin Strap: The adjustable chin support, along with the adjustable neck pad on the locking collar gives the commercial diver a comfortable, secure fit.
Specifications
  • Weight: 33.56 lbs.
  • Helmet Shell: Fiberglass, polyester resin, polyester gel coat, and carbon fibers
  • Control Knobs: Polyurethane
  • Lens: Scratch Resistant Polycarbonate
  • Neck Dam: Neoprene. Optional latex neck dam available.
  • O-Rings: Buna-N
  • Head Cushion: Nylon bag filled with #4 Polyester foam
  • Recommended Lubricants: All helmets and masks are lubricated at the factory with Christo-Lube. Kirby Morgan recommends Christo-Lube or Tribolube for all gas train components. Dow Corning 111 Silicone or equivalent may be used for helmet and mask components that are used with gas mixtures containing less than 50% oxygen
  • Rex Regulator: The Rex regulator on the Kirby Morgan 47 offers high performance. The regulator has been tested at Dive Lab at Panama City, Florida. It meets or exceeds all current U.S. Navy and European diving standards.
  • CR Standards: These helmets meet or exceeds all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.
Write Your Own Review
You're reviewing:Helmet, KM-47, Yellow, Stock Trim, Com. Posts