Helmet, KM-37SS,Stainless Stock Trim, Com. Posts

Helmet, KM-37SS,Stainless Stock Trim, Com. Posts

Helmet, KM-37SS,Stainless Stock Trim, w/MWP

was $11,908.55 Special Price $10,717.70
Availability: Out of stock
SKU
500-101
STAINLESS STEEL KIRBY MORGAN 37SS WITH WATERPROOF CONNECTOR

The KM-37SS features an all stainless steel shell, as well as a stainless sideblock, helmet ring, handle, and other key components. The SuperFlow 350 is standard on this helmet.

The advantages of this stainless steel helmet include the following:
  • Rugged helmet shell and other components
  • No refinishing required if the surface is scratched or gouged
  • Elimination of threaded inserts for securing port retainer to helmet shell
Features
  • SuperFlow 350 Regulator: This all metal, fully adjustable, Commercial Rated™ demand regulator provides easy breathing and excellent performance with low pressure compressors.
  • Air Train: The air train diffuses incoming breathing air/gas onto the face port/lens to defog and ventilate.
  • Defogging Steady Flow Valve: Provides an additional flow of gas into the helmet for ventilation and defogging.
  • Emergency (EGS) Valve: Emergency (EGS) Valve supplies backup breathing gas to the diver. This valve is an integral, built in part of the stainless steel sideblock.
  • Gas Supply Non-Return Valve: Commercial Rated, It prevents loss of gas pressure in the event of umbilical damage.
  • Handle: Removable Grip and handle. Handle can be removed without breaking seals, making it quick and easy to attach accessories.
  • Nose Block: Nose Block Device allows the diver to block the nose to equalize ears.
  • Rapid Change Modular Communications Systems: Because the module is easily removed the helmet, repair or replacement of communications parts is quick and trouble free. It is available with either a male waterproof connector or a bare wire post connection.
  • Silicone Oral Nasal Mask: Made of a superior silicone material which is hypo-allergenic and has a longer work life than latex.
  • Stainless Steel Shell: After x-ray inspection, each 316 stainless steel shell, is precision CNC machined to tight tolerances, to ensure proper fit to all other mating parts. The shell is durable and easy to maintain. Easily cleaned using a Scotch Brite or similar type cleaning pad.
  • Stainless Steel Side Block: Multi use side block has additional ports built in to provide controlled air flow, if needed. The stainless steel sideblock has a built in EGS.
  • Whisker Wings: Bubble deflecting Whisker wings keep bubbles further from face port and ears, improving visibility and decreasing internal noise.
  • Handle: Removable Grip and handle. Handle can be removed without breaking seals, making it quick and easy to attach accessories.
  • Kirby Morgan Pull Strap: The pull strap has been improved with the addition of a stainless steel “D” ring. This makes for easier removal. It also allows the assembly to easily be hung for drying.
  • Kirby Morgan Positive-Lock Latch System: Developed by Kirby Morgan in 1992, consists of two sealed Positive-Lock™ pull pins which are pulled forward to release the neck collar and neck dam locking system. Even when the latches are released, the O-ring sealed neck dam maintains a positive seal and will not allow the seal to be broken until the collar actually clears the commercial diver’s shoulders, thus helping to prevent any flooding of the commercial diving helmet.
  • Kirby Morgan Quad-Valve Exhaust System: makes the commercial diving helmet very dry with no loss of breathing performance.
Specifications
The Kirby Morgan 37SS Commercial Diving Helmet has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89/686/EEC and, as far as applicable, the EN 250:2000, EN 250/A1:2006 and EN 15333-1:2008 (class B). It is fully CE marked with demand regulator SuperFlow 350 and 510-747 Silicone Oral Nasal Mask with Improved Face Sealing Flap for KMB Dive Helmets.
  • Weight: 30.96 lbs.
  • Helmet Shell: Stainless Steel
  • Control Knobs: Polyurethane
  • Lens: Scratch Resistant Polycarbonate
  • Neck Dam: Neoprene. Optional latex neck dam available.
  • O-Rings: Buna-N
  • Head Cushion: Nylon bag filled with #4 Polyester foam
  • Recommended Lubricants: All commercial diving helmets and band masks are lubricated at the factory with Christo-Lube. Kirby Morgan recommends Christo-Lube or Tribolube for all gas train components. Dow Corning 111 Silicone or equivalent may be used for helmet and mask components that are used with gas mixtures containing less than 50% oxygen.
  • SuperFlow 350 Regulator Performance: The Kirby Morgan SuperFlow 350 regulator on the Kirby Morgan Commercial Diving Helmet 37SS offers high performance. The Kirby Morgan SuperFlow 350 regulator has been tested at Dive Lab at Panama City, Florida. It meets all current U.S. Navy and European commercial diving standards.
  • CR Standards: Kirby Morgan Commercial Diving Helmet 37SS meets or exceeds all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.
  • CE Approved: The Kirby Morgan 37SS Commercial Diving Helmet is CE Approved. The Kirby Morgan Commercial Diving Helmet 37SS has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89/686/EEC and, as far as applicable, the EN 250:2000, EN 250/A1:2006 and EN 15333-1:2008 (class B). It is fully CE marked with demand regulator SuperFlow 350 and 510-747 Silicone Oral Nasal Mask with Improved Face Sealing Flap for KMB Dive Helmets.
    Write Your Own Review
    You're reviewing:Helmet, KM-37SS,Stainless Stock Trim, w/MWP